This is the most efficient single piece of equipment for separating minerals and waste with different specific gravities. It can separate raw material which is 50% coal and 50% shale.
Derek Parnaby Cyclones International Ltd
Co Reg. 1124062 (England)
Registered Office
Chilton Industrial Estate
Chilton nr Ferryhill
County Durham
DL17 0SH (UK)
TEL +44 (0)1388 720849
FAX +44 (0)1388 721415
enquiries@parnaby.co.uk
The dense medium drum is horizontal and revolves slowly (about 1 - 3 rpm). As the raw material enters the drum, magnetite is added via the water circuit to achieve the required density. Separation is achieved entirely by the buoyancy of the medium; dynamic effect plays no part. The coal floats near the surface of the medium and flows out of the end of the drum. The heavier shale falls to the bottom of the drum and is moved along the scrolls to perforated lifters which scoop it into a waste chute.
This drum has a second chamber which repeats the process (at a higher separation gravity) thus producing prime coal, middlings and shale.